How To Use Diagonal Pliers?

The edge of the German Type Diagonal Pliers can be used to cut the rubber or plastic insulation of the flexible wire. The knife edge of the Japanese Type Diagonal Pliers can also be used to cut wires and wires. When cutting the 8th galvanized iron wire, use the blade to cut back and forth around the surface, and then just pull the wire and the wire is broken. The cornice can also be used to cut hard wires such as wires and wires. Electricians commonly used in a variety of specifications, such as 150, 175, 200 and 250mm. It can be purchased according to the internal or external work types. The pinion of the pliers can also be used to tighten or loosen the nut.

The person using the tool must be familiar with the performance, characteristics, use, storage and repair and maintenance methods of the tool. The use of pliers is done with the right hand. With the jaws facing inward, it is convenient to control the jaw cutting position. Use the little finger to reach the middle of the two jaws to resist the jaw handle and open the jaws so that the jaws are flexible.